AudioEngine Audioengine 5 Manual de instalación - Página 4
Navegue en línea o descargue pdf Manual de instalación para Altavoces AudioEngine Audioengine 5. AudioEngine Audioengine 5 10 páginas. Premium powered bookshelf speakers
También para AudioEngine Audioengine 5: Manual de instalación (2 páginas), Manual de instalación (15 páginas)
Imprimir página
Connecting Your System
Step 1– Speaker Wire Connection
Connect the
RED (+)
and BLACK (-) terminals from the left speaker to the
corresponding terminals on the right speaker using the included speaker
wire. Be sure to match the gold-colored side of the speaker wire with the
RED (+)
terminals and the silver-colored side to the BLACK (-) terminals on
each speaker.
Note: As the Audioengine 5 speaker system is self-powered, do not connect the
speaker terminals to the speaker outputs of a stereo receiver.
Detailed procedure:
•
Remove the pre-cut insulation on the end of the speaker wire and twist
the exposed wire strands 2-3 times.
•
Use your thumb and nger to unscrew the binding post connector.
•
Insert each speaker wire into the holes on the side of the binding post
connector.
•
Retighten the binding posts. The stripped wire portion should be
secured rmly in the connector.
Repeat the procedure to connect the other end of the speaker wire to the
other speaker. Be sure to match the wire color to the same terminal color on
each speaker. Also, make sure that none of the speaker wire strands have
come in contact with an adjoining terminal.
Step 2 – Power Cable Connection
•
Verify that the power switch on the rear panel is in the OFF position.
•
Verify that the voltage selector switch is set to the proper voltage for
your area.
•
Connect the power cord into the left speaker and the other end into the
wall outlet.
4
audioengine 5 setup guide
Left (Active) Speaker
1
LINE OUT
L
R
AUDIO IN
AUX OUTLET
POWER ON/OFF
OFF
AC SELECT
2
audioengine 5 setup guide
Right Speaker
US Version
EU Version
1
2
5