Freedom Innovations iQ Manual de instrucciones - Página 9

Navegue en línea o descargue pdf Manual de instrucciones para Equipamiento médico Freedom Innovations iQ. Freedom Innovations iQ 11 páginas. Vacuum device
También para Freedom Innovations iQ: Manual del usuario (10 páginas), Manual de instalación (16 páginas)

Imprimir página

Stop on Leak

The user may toggle the Stop on Leak feature on or off from the

Settings menu (Controls>Settings>Misc). While toggled on, the Stop

on Leak feature will automatically power down the iQ Vacuum when

a faulty seal is detected, preventing continuous running and possible

damage. In circumstances where the user desires to continue

wearing the prosthesis in spite of a leak, toggling Stop on Leak off

will cause the iQ Vacuum to alternate between pump and rest, instead

of turning off.

Vent on Power Off

The Vent on Power Off feature is available to users through the

Settings menu (Controls>Settings>Misc). The Vent on Power Off

feature enables the user to set a time in seconds that the iQ Vacuum

should vent vacuum (allow air to come in) each time it is powered

down, helping users in removing their prosthesis.

Downloading and Launching App

Download the iQ Vac App from the Apple App Store or the

Google Play App Store.

Connecting and Pairing to iQ Vacuum via iQ Vac App

•

Once App is open, tap the "Connect" button.

•

Tap the ID number (or custom name) of the iQ Vacuum to connect.

NOTE:

When connecting to iQ Vacuum with a mobile device for the

first time, the iQ Vac App will instruct the user to hold their mobile

device very close to the iQ Vacuum unit to ensure this is an authorized

wireless request.

Disconnecting

When you are done interacting with iQ Vacuum, select

Controls>Disconnect to disconnect the Bluetooth connection to

iQ Vacuum. This will conserve battery power.

Freedom Innovations |

iQ Vacuum

| Instructions for Use

Warranty

Purchase of the iQ Vacuum includes a 24-month warranty covering all

manufacturer defects effective only if the product is used according to

manufacturer recommendations.

Technical Support

•

For User Support, please contact Prosthetist.

•

For Prosthetist Technical Support or supplementary training

material please contact Freedom Innovations at +31 53 20 30 300.

Electromagnetic Precautions

The Freedom iQ Vacuum

™

needs special precautions regarding

electromagnetic compatibility (EMC). Specifically it needs to be

installed and put into service according to the EMC information

provided as follows:

•

This device complies with Part 15 of the FCC Rules. Operation

is subject to the following two conditions: (1) this device may

not cause harmful interference, and (2) this device must accept

any interference received, including interference that may cause

undesired operation.

Guidance and Manufacturer's Declaration

– Electromagnetic Emissions

iQ Vacuum is intended for use in the electromagnetic environment

specified below. The customer or user of iQ Vacuum should assure that

it is used in such an environment.

Emissions

Compliance

Test

RF Emissions

Group 1

EN 55011/CISPR

RF Emissions

Class B

EN 55011/CISPR

Electromagnetic Environment –

Guidance

iQ Vacuum uses RF energy only for

internal functions. Therefore, its RF

emissions are low and are not likely

to cause any interference in nearby

electronic equipment.

iQ Vacuum is suitable for use in all

establishments, including domestic

establishments and those directly

connected to the public low-voltage

power supply network that supplies

buildings used for domestic purposes.