Dangerous Music 2Bus LT Manual del usuario - Página 2

Navegue en línea o descargue pdf Manual del usuario para Amplificador Dangerous Music 2Bus LT. Dangerous Music 2Bus LT 11 páginas.

Safety Review

Certain precautions should be taken when using electrical products. Please observe the safety hints by

reading the manual and obtaining qualified help if necessary to adhere to the precautions.

1. Always use a properly grounded power supply cord with this product. Please do

not defeat the ground pin on the mains plug. This connection provides earth to the chassis and

signal grounds inside the device for clean and quiet operation. The "Grounding and interface"

section can help the user/installer clear up a buzz problem if one develops.

2. Avoid high temperature operation in equipment racks by providing air

circulation. The number one killer of electronic gear is HEAT. Vented rack panels may look like

wasted space to an interior decorator, but they look like beauty to a technician or equipment

designer! If the front panel is hot, it is roasting inside the box.

3. Avoid areas of high magnetic fields. The steel chassis of 2Bus LT is designed to

shield the circuits from EMI and RFI (magnetic and radio interference). When installing

equipment in racks, it is prudent to put power amplifiers and large power supplies at least several

rack spaces, if not in a different rack, away from equipment that deals with low level signals.

Separation of high level and low level equipment can pre-empt trouble caused by heat and EMI.

4. Care should be taken to avoid liquid spills around equipment. If a spill occurs,

please shut off the gear and disconnect the mains. A qualified technician should investigate

accidents to prevent further equipment damage or personnel hazards caused by spills.

5. If one is uncomfortable with opening gear and changing jumpers or making

adjustments, please seek qualified help if necessary.

6. If adjustments or jumper changes are required, please disconnect the mains plug

before opening the top. Dropped screws or tools on a live circuit board can manifest themselves

as burn marks and smoked components. While we feel your pain, (been there) subsequent damage

is not covered by the warranty.

Dangerous Music Incorporated reserves the right to change the specifications or modify the designs

of its equipment. Sending in the registration card is our way of keeping in touch with users of our

equipment should this become necessary. Registration information is always kept confidential and never

disclosed to third parties for any reason. Company contact information is on the last page of this manual.

The CE sign on this product signifies the fact that the 2Bus LT has been tested

and verified to conform to the applicable standards of 89/336/EEC. EN55103-1

(emissions) EN55103-2 (immunity) and EN60065:2002 (safety requirements)

-2-