Danguard HS-410 Manual del usuario - Página 8

Navegue en línea o descargue pdf Manual del usuario para Sistema de seguridad Danguard HS-410. Danguard HS-410 17 páginas.

Imprimir página

5. Main Menu

5.2 Record

Press in the real-time monitoring the MENU but-

ton to enter the main menu.

Press the t or u button to select the menu

item RECORD. Confirm with OK.

Timer Recording

Press the p or q button to select the menu

item „Timer Recording". In this menu you can

set a recording at a certain time.

1. Press the p or q button to select „Camera". Using the t or u button to select whether a parti-

cular (camera 1-4) or all cameras to record a video.

2. Press the p or q button to select „Date". Using the t or u button to select on which day you will

record. It is also possible to set the following options: Mon-Fri, Mon-Sat, Sat-Sun, or on a specific day.

3. Press the p or q button to select „Start Time". Using the t or u key to select a any desired hour.

Using the p or q button to move to minutes.

4. Press the p or q button to select „End Time". Using the t or u key to select a any desired hour.

Using the p or q button to move to minutes.

After you have made all the settings, press the

OK button to set the timer to save and again

to check your settings in an overview. To save

the timer settings and exit the menu, press the

MENU button. If you want to add another recor-

ding, select „New Schedule" and confirm with

OK. It can max. 6 recordings are programmed.

Note:

The timer recordings are

saved only when you insert an

SD card or a USB device.

ENGLISH

5. Main Menu

Motion Detection

Press the p or q button to select the menu

item „Motion Detection". In this menu, you can

specify that a camera automatically records

video when motion is detected.

Press the p or q button to select a camera and confirm with OK. In the following menu you can

adjust various settings of the selected camera:

Sensitivity:

Select the sensitivity of motion detection. You can choose between low, medium and high. In „high"

are as good as all movements cause the camera starts recording.

Motion Detection:

Turns the motion detection of the selected camera on or off.

Stop Condition:

Select the time after which the recording will stop again if no movement is detected by the camera.

You can choose from 8 to 120 seconds.

Area Setting:

Choose an area of the camera on which the camera is focusing. This area of the image is particularly

sensitive when movement takes place.

When you have made your settings, press the MENU button to save and exit the menu.

Note:

The motion detection not only responds

to people. Also, animals or other things

that move in front of the camera can trig-

ger recording.

ENGLISH