Audiolab 8300MB Instrucciones de uso - Página 3
Navegue en línea o descargue pdf Instrucciones de uso para Amplificador Audiolab 8300MB. Audiolab 8300MB 8 páginas.
Imprimir página
2: Getting Started
Welcome to Audiolab 8300 Series
The 8300MB is a pocket powerhouse, housing 250W of pure, balanced amplification in a
casing no bigger than a shoebox.
8300MB's full power output is delivered into any loudspeaker load – unconditionally.
Massive reserves of power are available for high current drive capability to power and control
the mightiest of speakers.
This latest development of the Audiolab range now features a fully balanced power stage
making the most of the balanced XLR inputs. This makes 8300MB a perfect match for the
8300CD using its balanced outputs, even over long cables.
If you prefer you can position 8300MB close to each loudspeaker and use long, balanced
cables to transfer the signal from 8300CD or a preamplifier. This puts 8300MB in even
closer contact with your loudspeaker for improved transient starts and stops.
However you use 8300MB we are certain that you will love the pure sound quality and
unrestrained dynamics that this amplifier brings to your hi-fi system.
Please read through this manual to obtain the very best performance from 8300MB.
Inputs:
•Loudspeaker output
•12V trigger in
Outputs:
•Line analog input
•XLR balance analog input
•12V trigger out
Operating Features:
•RCA/XLR Line input selector
•250W full power output
•Support 4 ohm or 8ohm loudspeaker
•0.5W ErP standard standby power consumption
•Low THD Hi-end amplifier
•Standby key control function
•True balanced design for high-end sound quality
Unpacking
Unpack the product fully. The carton should contain:
• The Audiolab 8300MB
• One IEC power cord suitable for your area
• This instruction manual
If an item is missing or damaged, report this to your dealer as soon as possible. Remain
the packing for safe transport of your unit. If you dispose of the packing, please do so with
regard to any recycling regulations in your area.
Placement
The unit is designed to run warm during normal operation but ensure you do not block any
ventilation openings.
Place the unit on a sturdy shelf or table. If you use equipment racks, ensure the unit has
adequate ventilation and is on its own shelf.
Ensure your mains voltage corresponds to the rating plate on the rear of the product's power
supply. If in doubt, consult your dealer. If you move to an area with a different mains voltage,
seek advice from an Audiolab appointed dealer or a competent service technician.
Page 2