Audiolab 8300CDQ Instrucciones de uso - Página 8

Navegue en línea o descargue pdf Instrucciones de uso para Reproductor de CD Audiolab 8300CDQ. Audiolab 8300CDQ 17 páginas.

Imprimir página

2SHUDWLRQ

Switching On and Off

Connect power to all system units. Switch the mains on. Switch on all source units

including the 8300CDQ. Switch on the power amplifiers.

When switching off:

switch off the amplifier first before switching off the

8300CDQ unless they are trigger enabled.

When switching on:

The power LED illuminates.

Standby Mode

Audiolab 8300CDQ will be in standby mode when power on. Press the

to bring 8300CDQ out of standby, the power indicator LED becomes brighter,

after a short period the units boots up,the display shows the welcome screen

You can activate the 'auto standby' function by holding the

seconds. Using this 'auto standby' function, 8300CDQ will automatically go into

standby mode when there is no signal input or operation for 20 minutes, and the

power indicator LED becomes dim .

Altering the Volume Level

Press the VOL +/- keys on front panel to alter the level.

The range is -80dB to +3dB, 0dB is nominally 2.0Vrms .

The factory default volume is -20dB. If the volume is set to lower than -20dB when

the unit is closed, the default volume will be last used value when the unit next

boots up. If the volume is set to higher than -20dB, the default volume will be

-20dB when the unit next boots up.

Playing a CD

If not already selected, press the DIGITAL key on the handset to cycle the CD

input, or cycle the SEL key on the front panel to select the CD input.

button

button down for 3

Page 7

Loading a Disc

Insert one CD into the slot. The disc information will now display. After

reading the track information the disc will stop.

Playing a Disc

Press

to play a disc.

Press

to pause a disc, press again to resume play

Press

to stop the disc

Press

to eject the disc

Next/Previous Track

Press

to move to the next track.

Press

to once to replay the current track.

Press

repeatedly to move through the tracks forward or back

on track at a time.

If you exceed the number of tracks on the disc, the player will wrap

round and play from track 1.

If you go past track 1, the player will wrap round and reverse search

from the final track on the disc.

Direct selection of the tracks from the handset

Select the wanted track directly from the remote key pad. The disc

will play forward from the chosen track. If you choose a single digital

track (e.g.1) in a disc which contains more than 10 tracks, the player

will pause briefly, waiting for you to enter a second digital. If none is

entered, player will commence from the entered single-digit track. If

the choice is invalid the display reverts to the previous state.

Note: You can preselect a track before you load a disc. When the disc

is loaded the player will play from the selected track.

1R 'LVF

/RDGLQJ

5HDGLQJ

7UN

(MHFW