3Ware 3WARE 9650SE Especificación

Navegue en línea o descargue pdf Especificación para Multiplexor 3Ware 3WARE 9650SE. 3Ware 3WARE 9650SE 7 páginas. Remote battery board
También para 3Ware 3WARE 9650SE: Apéndice del manual del usuario (1 páginas), Manual del usuario (11 páginas), Manual de instalación (4 páginas)

Using the AMCC 3ware
with a Supermicro
2
The AMCC 3ware I
C Multiplexer (I
3ware 9650SE or 9550SXU RAID controller to one of 3 Supermicro
backplanes and provide enclosure services for up to 32 drives in a
2
single enclosure. By using the I
you can take advantage of enclosure services such as LED signaling of
drive identification, drive fault indication, and drive rebuild indication.
2
The I
C MUX supports these 3 Supermicro SAS Backplanes:
826TQ (12 drive)
836TQ (16 drive)
846TQ (24 drive)
This document describes how to connect an I
9650SE or 9550SXU RAID controller and to one of the 3 supported
Supermicro backplanes.
What's included in this package
2
AMCC 3ware I
C Multiplexer with full-height bracket attached
One half-height bracket (for use if needed)
2
One I
C-to-controller (upstream) cable, 75 cm, #150-3101-00
2
One I
C-to-controller (upstream) cable, 25 cm, #150-3102-00
2
Three I
C-to-backplane (downstream) cables, 75cm, #150-3103-00
PN: 720-0181-00 www.3ware.com
®
2
C MUX) allows you to connect a
C MUX and the 3ware 9.4.3 software,
2
C MUX to a 3ware
®
2
I
C Multiplexer
Backplane
What you need
2
AMCC 3ware I
C Multiplexer and connector cables (this package)
3ware 9650SE or 9550SXU RAID controller and SATA cables
Supermicro SAS Backplane 826TQ, 836TQ, or 846TQ
Additional documentation
This document provides information on how to connect the I
to your 9650SE or 9550SXU RAID Controller and Supermicro
backplane.
For additional information about 3ware RAID controllers, including
use of the enclosure services, refer to the following documents.
3ware Serial ATA RAID Controller User Guide, Version 9.4.1
3ware Serial ATA RAID Controller User Guide, 9.4.3 Addendum
For complete information about the Supermicro backplanes, see the
appropriate documentation at Supermicro's website.
http://www.supermicro.com/manuals/other/BPN-SAS-826TQ.pdf
http://www.supermicro.com/manuals/other/BPN-SAS-836TQ.pdf
http://www.supermicro.com/manuals/other/BPN-SAS-846TQ.pdf
2
C MUX
1