Brainworx Fuchs Overdrive Supreme Manual del plugin - Página 9
Navegue en línea o descargue pdf Manual del plugin para Equipos de grabación Brainworx Fuchs Overdrive Supreme. Brainworx Fuchs Overdrive Supreme 10 páginas.
Imprimir páginaF X R A C K I n / O u t
IN/OUT CONTROLS
INPUT GAIN:
Continuous knob, 1 to 10. If you want to drive the input of the Fuchs preamp
harder or softer you may adjust the input gain to your liking. Some single coil pickups from
older or vintage guitars may deliver low level output that can be compensated with the
INPUT GAIN.
The opposite goes for a lot of heavy metal style humbuckers. If you have recorded the
DI signal too hot or if you are using other plug-ins before entering the Fuchs amp plug-in
you may want to dim the input signal.
With most standard amps you can and should leave the INPUT GAIN at 0 (zero) though.
PREAMP BYPASS:
On/off switch. Bypass the preamp section
POWER AMP BYPASS:
On/off switch. Bypass the power amp section
|
Fuchs Overdrive Supreme
POWER SOAK:
used to reduce the volume of a power amp. This way you can crank up a (tube) power amp
to drive it until it starts clipping, and still record at a volume which will protect your hearing
and keep the neighbors friendly.
A clipping tube power amp adds distortion and harmonics to the signal. A fully cranked
up tube amp tamed in volume with a power soak will sound different than the same amp
with the master volume turned down.
We have modeled the behavior of the Fuchs power amp, so you may experiment with
different settings of the Master Volume of the amp and the internal POWER SOAK. We
recommend a setting of roughly -10dB for most scenarios.
Continuous knob, -40dB to 0dB. In the real world, power soaks are being
9