Danish Interpretation Systems
Important
Compliancy
The equipment has been tested and found to comply
with the limits of the following norms and
approvals:
•
EN55013 of 2001 (emission)
•
EN55020 of 2002 (immunity)
•
EN60065 of 1998
These limits are designed to provide reasonable
protection against harmful interference when the
equipment
is
operated
environment. The equipment generates, uses, and
can radiate radio frequency energy and if not
installed and used in accordance with the user
manual it may cause harmful interference to radio
communications.
You
are
cautioned
modifications not expressly approved in this manual
could void your authority to operate this equipment.
Installation precautions
Allow adequate air circulation to prevent internal
heat built-up. Do not place the unit on a surface
(rugs, blankets, etc.) that may block the ventilation
holes.
.
4
in
a
commercial
that
any
changes
Manual 01 18 04466 Printed in Denmark
Do not install the unit in a location near heat
sources such as radiators or air ducts, or in a place
exposed to direct sunlight, excessive dust or
humidity, mechanical vibration or shock.
To avoid moisture condensations do not install the
unit where the temperature may rise rapidly.
Cleaning
To keep the cabinet in its original condition,
periodically clean it with a soft cloth. Stubborn
stains may be removed with a cloth lightly
dampened with a mild detergent solution. Never use
organic solvents such as thinners or abrasive
cleaners since these will damage the cabinet.
Repacking
or
Save the original shipping carton and packing
material; they will become handy if you ever have
to ship the unit. For maximum protection, re-pack
the unit as originally packed from the factory.
Warranty
The individual units in the DCS 6000 system are
minimum covered by 12 months warranty against
defects in materials or workmanship.
Operation manual
Imprimir página