Conrad-Johnson MV45 Manual del usuario - Página 5

Navegue en línea o descargue pdf Manual del usuario para Amplificador Conrad-Johnson MV45. Conrad-Johnson MV45 8 páginas. Vacuum tube power amplifiers

Imprimir página
Conrad-Johnson MV45 Manual del usuario

INSTALLATION

Your new conrad-johnson power amplifier has been tested and adjusted at the factory
with the tubes enclosed with the unit. It will minimize set up time if the tubes are
installed in their marked sockets, i.e.: tube marker V2 (on box) installed in socket
marked V2 (on chassis).
The conrad-johnson power amplifier must be installed in a location that provides
adequate ventilation. At least four inches of clearance is necessary above the
amplifier, and three inches on each side. Air flow should be unobstructed. To
minimize hum pickup, the amplifier should be located away from the preamplifier,
the turntable, and cables carrying low level signals, especially phono cables.
This unit is to be operated on an AC line voltage of 108 to 120 volts (120 volts
nominal).