AudioMX HG-31B Manual del usuario - Página 6

Navegue en línea o descargue pdf Manual del usuario para Auriculares AudioMX HG-31B. AudioMX HG-31B 10 páginas. Digital over-ear headphones

Transmitter

Rear View

Headphones battery installation

1. To install or replace the rechargeable batteries, carefully pull out the headphones cushion

(Left) and take it off.

2. Insert the 2 pieces of AAA size rechargeable batteries (supplied in the package) into the

battery compartment of headphone cabinet (Left). Make sure the batteries are placed at

the right polarity.

3. Reinstall the cushion to the headphones after the batteries are inserted.

Music Player

RCA Cable

DC 5V 550mA

Power Adaptor

Mains

Socket

Operation

Using the transmitter and the headphones

1. Turn on the audio source which the transmitter is connected to. The LED indicator on the

transmitter will light in orange when the transmitter receives the audio signal.

2. Turn on the headphones by pressing the power button for about 1 second. The LED

indicator on the headphones will light up in red. It changes to green when the audio

signal link between the transmitter and headphones is established.

3. Place the headphones on your head. To obtain the desired sound level, adjust the volume

control on the headphones.

4. If interference or poor signal reception occurs, the headphones will mute and the green

LED will change to red. The headphones will automatically search for another channel to

run. The LED indicator on the headphones will light up in green again when the re-link

between the transmitter and headphones is successful.

5. When the battery power of the headphones is too low, the LED indicator on the

headphones will blink in red. There will be beeping sound from the headphones every

minute. After two continuous beeping sounds, the headphones will automatically turn

Off.

6. The headphones can be used as regular wired headphones by connecting your audio

source to the headphones' jack directly.