3xLogic VISIX S-Series Manual de inicio rápido - Página 11
Navegue en línea o descargue pdf Manual de inicio rápido para Cámara de seguridad 3xLogic VISIX S-Series. 3xLogic VISIX S-Series 16 páginas. Indoor ip dome camera
También para 3xLogic VISIX S-Series: Manual de inicio rápido (17 páginas)
Imprimir página
2 Camera Setup
Detecting, Activating Changing the Camera IP Address
After networking the camera with the LAN, the user must obtain the camera's IP address to connect to the
device. To obtain the IP address, the 3xLOGIC Camera (VISIC IP) Setup Utility, a software tool which can
automatically detect online network cameras on the LAN, add these devices to VIGIL Server and list the device
information including IP address, subnet mask, port number, device serial number, device version, etc... is
recommended. An example is shown in Figure 2-3.
This utility is installed alongside VIGIL Server or can be downloaded separately. If on a VIGIL Server system,
launch utility from Start>Programs>VIGIL>Utility or download the utility from the 3xLOGIC website's Software
Support Center > VIGIL Utilities (http://www.3xlogic.com/software-center) to a Windows PC.
Steps:
1. Launch the utility.
2. Click Detect Online Devices / Change IP Address.
3. Select the camera from the list of online devices.
4.
If you are configuring the camera for initial setup, click Activate to assign a new password. This step is
required for security purposes and must be completed before continuing. If the camera has previously
been configured, skip to Step 5.
5. Once you have assigned a new password to the camera, click Change IP Address and change the IP address
and subnet mask to the same subnet as that of your computer. Save the settings.
12000 Pecos St., Suite 290, Westminster, CO 80234 | www.3xlogic.com | (877) 3XLOGIC
3xLOGIC Camera (VISIX IP) Setup Utility
Figure 2-1
S-Series Camera Quick Start Guide | VX-2S-D4-RIA
11