Danley BC415 Manual del usuario - Página 4
Navegue en línea o descargue pdf Manual del usuario para Subwoofer Danley BC415. Danley BC415 8 páginas.
Section 1
Your New Subwoofer
1.1
Unpacking
For most of the Danley Sound Labs line we recommend that it be unpacked by two or more people. Refer to the spec sheet for
product weight. Remove tape and open top flaps. Lay the box on its side and slide the subwoofer out. Remove the packaging
wrap.
1.2
Inspection
Check to make sure the product is not missing hardware of any kind. If any brackets or additional accessory hardware is missing,
please don't hesitate to contact Danley Sound Labs.
1.3
Shipping Damage
If your subwoofer appears to have been damaged in shipping, please take clear photographs and contact Danley Sound Labs
immediately.
Section 2
2.1
THE BOUNDRY COHERENT SUBWOOFER
The BC subwoofer is another unique subwoofer alignment from Danley Sound Labs. Using woofers that combine into a single
exit provides impressive punch and extension out of a single cabinet. Due to the physical size of the BC design's center exit the
boundary exhibits forward directivity which can be increased with multiple enclosures.
Section 3
3.1
What Size Amplifier to Use
Selecting the right amplifier for your subwoofer depends on a variety of factors and uses. The owner is ultimately responsible for
choosing the best amplifier or amplifiers for the application. We recommend choosing an amp that is rated no less than continuous
and no higher than program. Please note "Continuous" does not mean "forever"! Most subwoofer manufactures, including Danley
Sound Labs, subscribe to the AES standards for subwoofer power ratings.
3.2
Connecting to the BC Subwoofer
Your Danley subwoofer has two NL4 ("speak-on") connectors located on a panel on the rear of the box. With the exception of
the BC415 all BC series subwoofers are wired as passive. The two NL4 connectors are wired parallel. The BC415 has two NL8
connectors wired parallel.
Wiring View of a NL4 and NL8 Connector
Page | 4
DANLEY OWNER'S MANUAL
Understanding the Difference
Initial Set Up
www.danleysoundlabs.com