Danley DTS10 Manual del usuario - Página 2
Navegue en línea o descargue pdf Manual del usuario para Subwoofer Danley DTS10. Danley DTS10 8 páginas.
Imprimir páginaThe instructions on this page apply to Danley powered units.
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Clean only with dry cloth.
6. Do not block any ventilation openings. Install in
accordance with the manufacturer's instructions.
7. Do not install near any heat sources such as radiators, heat
registers, stoves, or other apparatus (including amplifiers)
that produce heat.
8. Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades with
one wider than the other. A grounding type plug has two
blades and a third grounding prong. The wide blade or the
third prong is provided for your safety. If the provided plug
does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
9. The power plug at the wall must remain accessible to be
able to disconnect power from the apparatus.
10. Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the point
where they exit from the apparatus.
11. Only use attachments/accessories specified by the
manufacturer.
12. Unplug this apparatus during lightning storms or when
unused for long periods of time.
13. Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been damaged
in any way, such as power-supply cord or plug is damaged,
liquid has been spilled or objects have fallen into the
apparatus, the apparatus has been exposed to rain or
moisture, does not operate normally, or has been dropped.
14. This apparatus shall not be exposed to dripping or
splashing, and no object filled with liquid, such as vases,
shall be placed on the apparatus.
15. This apparatus has been designed with Class-I
construction and must be connected to a mains socket outlet
with a protective grounding connection (the third grounding
prong).
19. If the loudspeaker is exposed to changes in temperature
and humidity, internal condensation may develop. If
powered up with such condensation, electronic failure could
result. When exposed to environmental changes, allow the
loudspeaker at least 30 minutes to acclimate to a new
temperature before connecting to the ac mains and operating.
Page | 2
DANLEY OWNER'S MANUAL
20. Danley Sound Labs loudspeakers can produce sound
levels capable of causing permanent hearing damage from
prolonged exposure. The higher the sound level, the less
exposure needed to cause such damage. Avoid prolonged
exposure to the high sound levels from the loudspeaker.
WARNING: TO REDUCE THE RISK OF FIRE OR
ELECTRIC
SHOCK,
DO
APPLIANCE TO RAIN OR MOISTURE. DO NOT
EXPOSE THE APPARATUS TO DRIPPING OR
SPLASHING AND DO NOT PLACE OBJECTS FILLED
WITH LIQUIDS, SUCH AS DRINKS, ON THE
APPARATUS.
CAUTION: This product is energized as long as it is
connected to the AC mains supply.
CAUTION: Allow at least six inches of free space all around
the amplifier heat sink for sufficient ventilation.
www.danleysoundlabs.com
NOT
EXPOSE
THIS