Audiophile APS PurePower 700 Manual del usuario - Página 10
Navegue en línea o descargue pdf Manual del usuario para Fuente de alimentación Audiophile APS PurePower 700. Audiophile APS PurePower 700 19 páginas. 120 volt models audio power supply
Imprimir páginaInstalling optional Power Packs
Modules must be installed before powering the APS.
CAUTION:
A small amount of arcing may occur when connecting a PowerPack Module to the
APS. This is normal and will not harm you. Insert the connection cable into the APS battery con-
nector quickly and firmly.
· Plug the first PowerPack cable into the battery connector on the APS rear panel
· If additional PowerPacks are to be installed, plug the cable of the second cabinet into the
battery connector on the previous Powerpack
NOTE: The batteries charge to 80% capacity in approximately 2 hours. However, it is recommend-
ed that the batteries charge for 24 hours after installation or long-term storage. The battery
charging process will occur during normal operation and will not interfere with the supply of
power from the APS.
Audiophile Power Supply • www.audiophileaps.com
Installation
| 09