aevit DIGIPAD II Manual de instalación - Página 6

Navegue en línea o descargue pdf Manual de instalación para Sistema de vídeo para coches aevit DIGIPAD II. aevit DIGIPAD II 7 páginas. Power headrest

Power Headrest-6

Before you wire the headrest, first follow the instructions included with the ELB Control Modules to install the

harnesses directly to the vehicle. Then, simply plug the telco cables from the Power Headrest into the appro-

priate ELB Control Module. The switches on the Power Headrest-6 are not labeled, therefore, you can connect

to any control module. This allows some flexibility as to which switches will activate each function.

If the Power Headrest-6 is being installed in conjunction with the Digipad-II Econo Series console it can be used

to remotely operate the Wipers and Cruise functions without the need for a ELB Control Module. All you need

to do is connect the telco cable from the Power Headrest into the Econo Series WC port on the CPU. Now the

Function A & B buttons will operate all of the Wipers and Cruise functions.

Power Headrest-6 Operation

The diagram shows which secondary con-

trol will be activated when the switch is

depressed with your head. A gentle touch is

all that is required to operate the low-effort,

momentary switches.