Addonics Technologies CRT535PES Manual del usuario - Página 2

Navegue en línea o descargue pdf Manual del usuario para Almacenamiento Addonics Technologies CRT535PES. Addonics Technologies CRT535PES 4 páginas. Cipher raid tower

Imprimir página

IMPORTANT

There is no back door for the Cipher tower encrypted

hard drives if the Cipher keys are lost or stolen.

Cipher key

Check to make sure you have the correct version of the

Cipher key. A sample key is shown

Black label AES-256 stands for Cipher 256-bit key.

To ensure there is a spare key, your Cipher tower comes with a pair of Cipher keys.

These cipher keys have all identical encryption code unless you requested then to

be coded differently. One of these keys should be kept in a safe and secure location

and can be sent back to Addonics for duplicating additional keys. If you are down to

the last key, be sure to make a back up of all the data stored inside your Cipher tower

prior to sending the last key to Addonics. Addonics is not responsible for key lost in

the mail or retrieval of the data inside the encrypted hard drive.

Keeping track of the hard drive

If you are using the Cipher tower to encrypt multiple hard drives, it is important to

label your hard drive if you are taking the drive out of the Cipher tower. The hard

drive from the Cipher tower that is encrypted will look like a brand new drive when

attach directly to the SATA controller of a computer. There will be no partition or any

hint to indicate that the drive contains encrypted data. When the drive is partitioned,

all the encrypted data will be lost.

The same holds true if a hard drive already has data on it is installed into the Cipher

tower. The computer detects the hard drive as a brand new drive or a drive that is

unallocated. Once you proceed to partition the drive, the data that was on the hard

drive will be erased and cannot be recovered.

Installing drive into the Cipher tower

Step 1

Use a Philips screwdriver to secure the 3.5" SATA hard

drive to the drive tray.

Step 2

Slide the tray into the Disk Array drive bay.

Note: It is recommended to fill up the Cipher Tower with

SATA drives from right to left. This is to help in identifying which

drives connect to which ports for easier troubleshooting.

www.addonics.com

Technical Support (M-F 8:30am - 6:00pm PST)

Phone: 408-453-6212

Email: www.addonics.com/support/query/