Belden Hirschmann MACH104-20TX-FR Series Instrucciones de montaje - Página 16
Navegue en línea o descargue pdf Instrucciones de montaje para Interruptor Belden Hirschmann MACH104-20TX-FR Series. Belden Hirschmann MACH104-20TX-FR Series 20 páginas. Industrial ethernet workgroup switch full gigabit
Imprimir página
4
Technical data
General technical data
Dimensions
See "Dimension drawings" on page 17.
Weight
MACH104-20TX-F...
MACH104-20TX-FR...
MACH104-20TX-F-4PoE...
Operating voltage Rated voltage range AC
Voltage range AC incl.
maximum tolerances
Current consump-
Rated current for devices
tion
without PoE
Rated current for devices with
PoE
Activation current
PoE power
Maximum number of Powered
Devices (PDs)
Power failure
bypass
Overload current
Non-replaceable fuse
protection at input
Climatic conditions
Ambient air temperature
during operation
Humidity
Air pressure
Climatic conditions
Ambient air temperature
during storage
Humidity
Air pressure
Signal contact
Switching current
Switching voltage
Pollution degree
Protection classes Laser protection
Degree of protection
a. Temperature of the ambient air at a distance of 2 inches (5 cm) from the device
b. Temperature of the ambient air at a distance of 2 inches (5 cm) from the device
16
4.2 kg
4.4 kg
4.6 kg
100 V ... 240 V, 50 Hz ... 60 Hz
90 V AC - 265 V AC, 47 Hz - 63 Hz
max. 0.3 A (240 V AC)
max. 0.5 A (100 V AC)
max. 0.9 A (240 V AC)
max. 1.7 A (100 V AC)
typ. <40 A at 265 V AC and cold start
This applies to the following device vari-
ants only:
MACH104-20TX-F-4PoE...
4 × Powered Device (PD) class 0 (15.4 W)
> 12 ms (115 V AC)
a
.
+32 °F ... +122 °F (0 °C ... +50 °C)
20 % ... 90 %
(non-condensing)
minimum 795 hPa (+9842 ft; +2000 m)
maximum 1060 hPa (−1312 ft; −400 m)
b
.
−4 °F ... +185 °F (−20 °C ...+85 °C)
10 % ... 95 %
(non-condensing)
minimum 700 hPa (+9842 ft; +3000 m)
maximum 1060 hPa (−1312 ft; −400 m)
max. 1 A, SELV
max. 60 V DC or max. 30 V AC, SELV
2
Class 1 in compliance with IEC 60825-1
IP 30
Mounting Instruction MACH104
Release 07 07/2014