audiophony PA MX82 Manual del usuario - Página 12

Navegue en línea o descargue pdf Manual del usuario para Amplificador audiophony PA MX82. audiophony PA MX82 17 páginas. Multizone and rackable mixer/pre-amplifier with 8 inputs and 2 outputs

Imprimir página
audiophony PA MX82 Manual del usuario
English
5 - Presentation

Front panel

1
1
Mic/Line inputs
These inputs can be used to connect either a line level
1
2
3
source or a microphone level source. These inputs are
mono.
2
Line inputs
These inputs are used to connect a line-level source.
These inputs are stereo and can also operate in mono.
4
3
1 and 2 outputs level adjustment
4
Power switch
Turns the power on and off. When it is powered on, the
corresponding LED is lit.
5
Output equalization
- HIGH (High Frequency control): Allows you to adjust
the output signal trebles from -15 to +15 dB at 12kHz.
- LOW (low frequency control): Allows you to adjust the
output signal basses from -15 to +15 dB at 12kHz.
Page 12
MX82 - Multizone and rackable Mixer/Pre-amplifier with 8 inputs and 2 outputs
2
5
6
7
8
7
6
3
6
Output LED indicators
- SIG : This LED indicates the presence of an output
9
10
signal.
- -10dB : This LED indicates the minimum level of the
output signal.
- CLIP : This indicates an output level that is too high
at the output.
We strongly recommend not to exceed brief flashes of
these LEDs in order to prevent sound distortions.
8
12
7
Output channel selectors
Each input channel can be assigned to one or the other
of the outputs or both.
8
Input level indicator LEDs
- SIG : This LED indicates the presence of a signal on the
corresponding channel.
- CLIP : This LED indicates a too high level that is too
high at the input.
We strongly recommend not to exceed brief flashes of
these LEDs in order to prevent sound distortions.
5
4
11
13 14