audiophony Atom10A Manual del usuario - Página 8

Navegue en línea o descargue pdf Manual del usuario para Altavoces audiophony Atom10A. audiophony Atom10A 12 páginas.

Imprimir página
ATOM series - 2 ways 10/12/15" powered full range speaker and 15/18" powered subwoofer with DSP
8 - Subwoofers DSP Menu
MENUS
LEVEL menu
NORMAL
NORMAL
ATOM15ASUB
MODE menu
NORMAL
150 Hz
NORMAL
NONE
ATOM15ASUB
MODE
LOCATION DELAY
Menu LOCATION
NORMAL
HF:0dB
POLE
LF:0dB
ATOM15ASUB
LOCATION
DE
DELAY PO
Menu DELAY
NORMAL
150 Hz
NORMAL
NONE
ATOM15ASUB
DELAY
TION
POLARITY X
Menu POLARITY
NORMAL
150 Hz
NORMAL
0.25 m
ATOM15ASUB
POLARITY
DELAY
X-O
Menu X-OVER
NORMAL
150 Hz
NORMAL
0.25 m
ATOM15ASUB
OLARITY
X-OVER
OUTPU
Menu OUTPUT
NORMAL
150 Hz
NORMAL
0.25 m
ATOM15ASUB
OUTPUT
Y
X-OVER
UN
Page 8
150 Hz
NONE
0 dB
+10
Normal
0
Enforce
-10
Push to Save and Return
Normal
Cardioid
Endfire
Push to Save and Return
0.25m
Push to Save and Return
Normal
Reverse
Push to Save and Return
150Hz
Push to Save and Return
100 Hz
Push to Save and Return
MENU OPTIONS
This menu appears when the subwoofer is initialized and allows
you to adjust the subwooer's amplification level.
It is not necessary to press the button to make this setting.
The value varies from MUTE (no amplification) to +10dB.
This menu allows you to choose the behavior of the cabinet
according to how it is positioned.
-NORMAL : Choose this option when using the cabinet in front
of the sound system.
-ENFORCE :Choose this option when using the cabinet in front
of the sound system.
This menu allows you to optimize the response of ATOM15S and
ATOM18S when used alone or in groups.
-NORMAL : Choose this option when using the subwoofer in
nongroup mode.
-CARDIOID : Choose this option for a cardioid effect with the
pedestals in grouped mode.
-ENDFIRE : Choose this option when using two subwoofers in
longitudinal radiation one behind the other.
This menu allows you to add a delay time to the subwoofer to
align it over time.
The value of the delay is expressed in metres.
By default no delay time is applied.
This menu allows you to reverse the polarity of the sum of the
signals present at the input..
This menu is used to set the upper limit of the frequency range of
the subwoofer. The optimum setting is the minimum value of the
frequency range correctly reproduced by the full range speakers.
Among the available values for this setting you will find each of
the ATOM series full range speakers.
This menu is used to set the low limit of the frequency range sent
to outputs 1 and 2.