audiophony CR120A-U1 Manual del usuario - Página 11

Navegue en línea o descargue pdf Manual del usuario para Sistema estéreo audiophony CR120A-U1. audiophony CR120A-U1 14 páginas. Bluetooth sound system with usb player & 1 handheld mic

Imprimir página

120W B

CR120A-U1 -

LUETOOH

4 - 8 : Optional headband transmitter system:

0dB

INPUT

MIC

-10dB

SOUND SYSTEM WITH

STANDBY

ANT

OFF

USB

PLAYER AND

UHF HANDHELD MIC

1 - Jack 3.5 input to connect the microphone

2 - Input level selector. MIC is the standard configuration for

the headband microphone. You can switch to the 0dB or -10dB

positions if you want to use another type of microphone.

3 - ON/STANDBY/OFF power switch. The middle position allows

you to cut the microphone without interrupting the HF signal.

4 - Battery level indicator.

The indicator flashes in red when the batteries are discharged.

The indicator flashes in red when the ASC function is activated.

5 - Flexible antenna.

6 - Synchronisation IR diode. The ASC (Auto Synchro

Connection) function allows you to synchronise a chosen

channel between the transmitting microphone and the receiver

via InfraRed transmission.

To do so, select a channel (from 1-16) on the receiver. Press the

ASC button and put the IR diode of your microphone in front of

the IR diode (#9) of the receive

7 - Batteries compartment: LR06 x 2. Please make sure you keep

the same polarities if need to replace the batteries.

Note about the optional microphone:

Your CR120A-U1 features a single UHF receiver. That means you

cannot use two microphones simultaneously, and will have to

choose between the handheld and headband microphones.

1 - Connector to plug the bodypack transmitter.

Plug the headband microphone into the Jack #1

socket of the transmitter.

2 - Headband. Set the mic position in order for

the capsule to be slightly below your mouth.

3 - Capsule. Transforms the sound pressure into

a signal.

English

Page 11