Dansing Wings SCG37 Manual de instrucciones - Página 7
Navegue en línea o descargue pdf Manual de instrucciones para Juguete Dansing Wings SCG37. Dansing Wings SCG37 8 páginas.
Imprimir página05-7
尼龙线
Nylon wire
螺丝 Screw+螺母 Nut
M2*15mm
05-8
自攻螺丝
Self-tapping screw
M1.5x10mm
11
螺丝 Screw+螺母 Nut
M2*20mm
左右相同安装。并调整垂直尾翼与机身垂直。
Install the left and right in same method,and
adjust the vertical tail make sure it is vertical
with fuselage.
螺丝 Screw+螺母 Nut
M2*15mm
06
安装马达，像真件
Install the moto and scale parts
06-1
螺丝 Screw
M3*18mm
X3
爪牙螺母 Nut
M3
安装马达时设置右拉，下拉角度2°
Pls set the control throw to the right/
down as 2 ° when installing the motor.
06-4
自攻螺丝
Self-tapping screw
M1.5x10mm
06-6
飞行员放置座
pilot seat
06-2
06-3
进气管
Intake pipe
在马达座上涂抹环氧胶，然后把马达
座装入机身头部，并调整合适伸出长
度，调整好后可用夹子辅助固定住马
达座，待胶干固后取下夹子。
Apply epoxy glue on the motor
base, then install the motor base
into the head of the fuselage, and
adjust the appropriate extension
length.
After adjustment, fix the motor
base with the help of a clip,and
remove the clip after the glue is
dry.
06-5
橡胶条
Rubber strip
12