Belden HIRSCHMANN BAT450-F Manual del usuario - Página 2

Navegue en línea o descargue pdf Manual del usuario para Cables y conectores Belden HIRSCHMANN BAT450-F. Belden HIRSCHMANN BAT450-F 8 páginas.

User Guide

User Guide - Hirschmann BAT (HiLCOS) Devices

with Paessler PRTG Network Monitor

Paessler AG's PRTG Network Monitor is a common tool to observe the status of many network

devices. This guide will help you to quickly connect Hirschmann BAT (HiLCOS) devices such as:

• BAT-R, BAT-F

• BAT450-F

• BAT867-R, BAT867-F

Please be aware that monitoring devices excessively can take performance away from them as

well as cause additional traffic on the network. Especially in critical applications and when

monitoring devices over a WLAN connection instead of a switched infrastructure. This can cause

degradation of the application performance that would not be there without monitoring. We tuned

the default intervals for the example sensors for a typical system, but you should check and rework

these settings according to your application and requirements.

Ensure SNMPv3 is enabled

SNMPv3 is enabled by default, so it should already be enabled.

1. Remove the "admin" user: This user has permission to change settings over SNMPv3, which is

not necessary

2 of 8