Consort LST800EMWIF Manual de instalación y control - Página 8
Navegue en línea o descargue pdf Manual de instalación y control para Calentador Consort LST800EMWIF. Consort LST800EMWIF 8 páginas. Quality space heaters
Imprimir página
8
21. Naming the product in the Consort Connect App
Once the heater is linked with the app, it is given a gener-
ic name and icon. These can both be changed.
To do this, when the controller menu is open (this is the
menu you can control the product with) select the
icon in the top right corner of the screen. Next, select the
icon again. From this page, you can change the
name of the controller and import an image to represent
your product.
22. Setting the automatic program using the app
The 7-day program can be set using the app instead of
the electronic timer. To access the program page, select
the
icon. This 7-day program is the same as the one
discussed in section 8. Modifying the program on the app
will modify the program on the timer automatically.
Tapping an hour slot will turn it grey and bring up 2 options.
These are 'Delete' and 'Settings'. Tapping delete will de-
fault the temperature for that slot to 4°C . Tapping settings
will allow a temperature between 4°C and 40°C to be se-
lected.
Multiple hour slots can be selected at once provided they
are on the same day and in a row. For example, if the pro-
gram needed to be 22°C from 9am-5pm on Monday you
would need to follow the steps below.
1.
Select the box after 09:00 Monday (the box will turn
grey)
2.
Scroll down and select the box before 17:00 on
Monday. All boxes from 09:00 up to 17:00 will turn
grey.
3.
Select the option 'settings' which appears next to
the grey boxes.
4.
Select a temperature of 22°C.
5.
Tap 'Done'
All boxes between 09:00 and 17:00 will be set to 22°
6.
C and the heater will maintain this temperature dur-
ing these times.
Repeat these steps for all time periods so that the heater
runs as required.
Should you need any advice on the use of your new Consort product please contact
Thornton Industrial Estate, Milford Haven, Pembrokeshire, SA73 2RT
Operation hours: Mon to Thu 8.30am to 4.30pm | Fri 8.30am to 3.30pm
C
USTOMER
our Helpline:
Consort Equipment Products Limited
Tel: 01646 692172
Email: [email protected]
Web: www.consortepl.com
BS EN ISO 9001 Registered Company No FM12671
23. Smart Automation
The automatic program which is explained previously is
only capable of switching the heating on/off in one hour
increments, I.e. the heating could not be switched on at
10:30am, it would need to be either 10am or 11am.
The Smart automation feature which is only available via
the app can offer a solution to this. It allows an unlimited
amount of programs to be set on every day of the week.
To use it, follow the steps listed below.
1.
Open the Consort Connect app and select the
'Smart' option on the bottom of the screen.
2.
Select the '+' symbol located in the top right of the
screen.
3.
Select the option 'Schedule'
4.
Select 'Repeat' and choose the days which the
program is required to run on.
5.
Select an execution time. This is the time the pro-
gram will be triggered.
6.
Select 'Next'.
7.
Select 'Run the device' and choose the device the
program will control.
8.
Select 'Mode' and then choose the operating
mode the heater will switch to.
9.
Select 'Name' to name the operation (optional).
10.
Select 'Save'.
Repeat these steps for all automations required. A single
time period would require two automations, one to switch
the heater on, and one to switch the heater off.
You can activate/deactivate each individual automation
without deleting it. To do this, from the main app screen
select the 'Smart' option and use the toggle icon.
24. Group control
The APP can be set for group control where it is possible to
control multiple heaters at once.
To set it up, open the app, select a heater you want in the
group and press the edit icon in the top right hand corner.
Select create group and follow the instructions on the
screen.
H
ELPLINE
66001328 Iss 01