Consort CRX2-03 Manual de instalación y uso - Página 3

Navegue en línea o descargue pdf Manual de instalación y uso para Controlador Consort CRX2-03. Consort CRX2-03 5 páginas.

Imprimir página
10. Set 7-day programme (cont'd)
Logic diagram for setting programme on CRX2
10. Set 7-day programme (cont'd)
The CRX2 has a 7-day timer with up to 6 programming steps
available for each day. In the programming you can set a
start time and a temperature for each programme. Each
programme has to be used or set inactive.
11. Set programme inactive
To deactivate a programme, enter the programming mode.
Select the programme you want to make inactive and
tap
. The time and temperature will now be dashes to
indicate that the programme has been deactivated. In order
to re-activate the temperature setting, tap
12. Copy day function
The CRX2 allows you to copy a day's heating programme to
save time re-entering the same time and temperature settings
for a day.
1. To use a copy day function, enter the programming
mode.
2. To skip time setting, tap
3. On the next tap, the Programme mode is activated and
the day will flash.
4. Tap
to activate the COPY DAY function.
5. Tap
to select the day you want to copy the
temperature settings from.
6. Tap
or
to select the day you want to copy the
temperature settings to.
7. Tap
to confirm the selection.
The 'to' word will flash to indicate that the day programme
has been copied to the day selected.
Tap
to go back to the Programme mode.
8.
I3984069 Iss 03
- SET MINUTES
- SET HOURS
- SET DAY
- SELECT DAY TO SET
- SELECT PROGRAM TO SET
- SET MINUTES FOR PROGRAM
- SET HOURS FOR PROGRAM
- SET TEMPERATURE FOR PROGRAM
again.
to cycle through hour and day.
1. Touch and hold
setting.
2. The minutes will flash.
3. Tap
or
to set the minutes.
4. To set hour, tap
5. Tap
or
to set the hour.
6. To set day, tap
7. Tap
or
to select the day.
8. Tap
to access the 7-day programming mode.
9. Tap
or
to select the day you want to set.
10. Tap
to set programme 1 for selected day.
This is indicated by the flashing number.
11. Tap
to select minutes.
12. Tap
or
to set minutes.
13. Tap
to select hour.
14. Tap
or
to set hour.
15. Tap
to select temperature setting.
16. Tap
or
to set temperature.
13. Fan function - only available for fan heaters
Tap any control icon to activate the CRX2. Tap
activate or deactivate the fan function.
14. Advance mode
from SETB or PROG mode to bring forward next
Tap
programme. To clear advance mode, tap
15. Keys locking
Tap and hold
together for 5 seconds. The display will
show
symbol. Repeat the step to unlock.
16. Heat symbol on the display
Every time there is a demand for heat, the display will show
the heat icon.
- reduced heat output when the room temperature is
close to the set temperature.
- full heat output
for 5 seconds to enter the time
and the hour will begin to flash.
and the day will begin to flash.
to
.
3