Dantherm CDF 40 Instrucciones del kit de mantenimiento - Página 6
Navegue en línea o descargue pdf Instrucciones del kit de mantenimiento para Deshumidificador Dantherm CDF 40. Dantherm CDF 40 12 páginas. Replacing rh/t sensor
También para Dantherm CDF 40: Instalación rápida (12 páginas), Manual (6 páginas)
Imprimir página
EN
14.
•
Use an empty USB memory dongle.
•
Format the USB memory dongle til FAT32 file system. ( Details below)
•
Download the latest software version from URL: ftp://ftp.dantherm.com/DEHUMIDIFICATION/CDP 40-
50-70 - various documentation/Software/
and copy the file to the USB memory dongle.
•
Insert the USB memory dongle in the USB port of the controlpanel of the unit.
•
The unit will now auto detect the new software and install it.
•
The installation process should take no more than 30 seconds.
In the process a log file is stored on the USB memory dongle.
If you wish to read the log file but not update the software, just insert an empty FAT32 USB memory dongle
and a log file will be downloaded.
How to format
•
Insert a USB memory dongle in the USB port of the computer
a USB memory
•
Press WIN key(
dongle to
•
Type: CMD - hit enter
FAT32:
At the promt type: format /FS:FAT32 H: and hit enter.
The letter H is the drive letter.
Note: In the format process all data on the USB memory dongle will be erased.
6
Download and install latest software version
RUN
FAIL
HEAT1 HEAT2
USB
RS485
EXT RH/T
ALARM
12V DC
)+r
OK