Constellation audio PERSEUS Manual del usuario - Página 7

Navegue en línea o descargue pdf Manual del usuario para Amplificador Constellation audio PERSEUS. Constellation audio PERSEUS 19 páginas.

IMPORTANT NOTE: To preserve true dual-mono operation, the Perseus uses a symmetrical circuit layout. This

configuration requires that the Perseus's back panel connections be laid out a little differently from those on

most preamps. For example, the left-channel connection for MM input is on the right side of the back panel,

and the right-channel connection is on the left side. Connecting the cables in the usual side-by-side fashion

will result in an incorrect installation and the mixing of sounds from different source devices.

3. RCA MC inputs

These unbalanced inputs are provided as a convenience for use with turntables having only unbalanced

output. Whenever possible, we recommend using XLR connections instead. Connecting to an unbalanced

turntable is handled in the same way an XLR balanced source. As you are looking at the rear panel, the left

RCA input is for the right channel, the right input is for the left channel. These cannot be used concurrently

with the corresponding RCA inputs; for each input, you can use either XLR or RCA, but not both.

The RCA input numbers from left to right, looking at the back of the Perseus are:

MC-2

, MC-4

——MC-4

, MC-2

right

left

IMPORTANT NOTE: To preserve true dual-mono operation, the Perseus uses a symmetrical circuit layout. This

configuration requires that the Perseus's back panel connections be laid out a little differently from those on

most preamps. For example, the left-channel connection for MC-2 is at the far right side of the back panel,

and the right-channel connection is at the far left side. Connecting the cables in the usual side-by-side fashion

will result in an incorrect installation and the mixing of sounds from different source devices.

4. RCA MM input

This unbalanced input is provided as a convenience for use with turntables having only unbalanced output.

Whenever possible, we recommend using XLR connections instead. Connecting to an unbalanced source is

handled in the same way an XLR balanced source.

IMPORTANT NOTE: To preserve true dual-mono operation, the Perseus uses a symmetrical circuit layout. This

configuration requires that the Perseus's back panel connections be laid out a little differently from those on