Danz RHINE Manual de instrucciones - Página 3

Navegue en línea o descargue pdf Manual de instrucciones para Bañera de hidromasaje Danz RHINE. Danz RHINE 5 páginas.

Now, let's look at the different modes on the control panel.

Pressing

will cycle the spa through different modes manually. The different modes are:

NOM – normal operation

NOM ECE – normal mode for 1 hour, then economy mode automatically

ECE – economy mode

FIL – filtration mode

What do these modes mean?

NOM – The system is in normal operation, the heater is on (if the desired temperature isn't reached)

ECE – the system will only heat the water during the pre-determined filtration cycle

FIL – the system is in filtration mode. The heater will not be in operation. Manually using the filtration

mode is only needed if the system has been switched off for long periods of time.

If you are going to be using the spa on a regular basis, every day or every two or three days, set the spa to

NOM

so that the spa will always be hot for you. You can then use the arrows to adjust the minimum

temperature that you want the spa to remain at.

When the water temperature falls below 6.7

blowers will operate for 30 seconds and then turn off. All the heaters and circulation pumps will switch on. The

ICE.

panel will show

Pressing this symbol switches on the LED lights. They will cycle through various

colours. Press the button again to stay on a specific colour, and again to switch the

lights off. The lights will automatically shut off after 2 hours.

Pressing this symbol switches on the air blower. The blower will automatically turn

off after 25 minutes.

Pressing this symbol switches on the jets and fountains.

C the spa will switch to anti-freezing mode. All the pumps and