CONTACLIP EMS-eco Manual de instrucciones - Página 12

Navegue en línea o descargue pdf Manual de instrucciones para Plotter CONTACLIP EMS-eco. CONTACLIP EMS-eco 16 páginas. Easy-marking-system

8. Troubleshooting

If your plotter EMS-eco is not functioning correctly, please check the following:

Device fails to switch on

Plotter does not respond to

data downloaded from PC

No labelling is taking place

even though a plotter pen has

been inserted.

Poor labelling quality, uneven

line thickness, missing items

Check whether the mains plug and connecting plug

are plugged in correctly.

Check whether the socket being used is functioning

properly. Is the green light of the power supply

illuminated? If not, please replace the power supply.

Is the interface cable connected properly?

Replace the data cable if necessary.

Is the correct interface on the PC being used?

Check whether the plotter pen has dried out or if

there is sufficient ink in the pen.

Refill or replace the pen if necessary.

The plotter pen tip may be spoiled. Clean the tip

carefully using a lint-free cloth dipped in special

cleaning fluid.

Replace the plotter pen if necessary.