Contacta IL-RX20 Manual del usuario - Página 5

Navegue en línea o descargue pdf Manual del usuario para Audífonos Contacta IL-RX20. Contacta IL-RX20 8 páginas. Loop listener

The Loop Listener is powered by two AAA alkaline batteries.

Place the headset over both ears and adjust the side arms until you

have a comfortable fit.

2. Hold the Loop Listener unit in a vertical position at head height to

mimic the position of a hearing device.

3. Switch the unit on by turning the Volume Control Knob slowly

clockwise until a comfortable volume is reached. Turn the knob

counter clockwise to lower the volume if neccesary.

4. If the LED does not light up, check that the batteries are charged

and fitted correctly as shown on the drawing inside the battery

compartment.

5. If the LED is lit up and you are still unable to hear any sound, ask

a colleague or user to speak into the microphone position on the

hearing loop system, or test the input source if connected to a

sound system. Recheck the Loop Listener's reception.

6. When you have finished using the Loop Listener, switch the unit off

by turning the Volume Control Knob counter-clockwise until the

LED is no longer lit up.

Important

•

Always turn the device off when not in use to extend battery life

•

Always hold the Loop Listener vertically when listening to a loop

system to ensure the best possible performance

Operation