Contacta IL-EL42-PB Manual de instalación - Página 6
Navegue en línea o descargue pdf Manual de instalación para Sistema de interfono Contacta IL-EL42-PB. Contacta IL-EL42-PB 12 páginas. Hearing loop
Installation Instructions - Standard
1.
Identify and mark the mounting surface for the hearing loop's
back box installation. Ensure any cables can be fed to the chosen
location and into the unit.
2. On the sides of the back box, there are 8 circular blanks (see
below). Select an appropriate blank and remove it to create a hole
through which connections can enter the unit.
Note: If using a conduit, ensure the punched out hole is in an
appropriate location. The conduit should have an outer diameter
no more than 22.5mm and be fitted with a watertight seal.
3. Using the outer 4 fixing points (see below), screw the back box
into place. Use 4 fixing screws (not supplied) suitable for the
installation location's construction material. If using a conduit, fit it
to the back box and feed through cabling.
4. Connect the unit's PCB – located inside the front cover – to both a
power source and the relevant door entry system (see Connections
on page 4).
6
Circular
blanks
Fixing
points