DURASTAR DRPDRAD09F1A17 Manual del propietario y de instalación - Página 8
Navegue en línea o descargue pdf Manual del propietario y de instalación para Termostato DURASTAR DRPDRAD09F1A17. DURASTAR DRPDRAD09F1A17 10 páginas. Wired thermostat
Imprimir páginaHEAT
•
Press the MODE button and select HEAT.
•
Set your desired temperature using the TEMP down or TEMP up button.
•
Press FAN button to select the fan speed: AUTO, LOW, MED or HIGH.
•
Press the ON/OFF button to start the unit.
NOTE
• As outdoor temperature drops, the performance of your unit's HEAT function may
be affected.
• Two or more indoor units can be operated by one outdoor unit. When several indoor units
are operated simultaneously, cooling/dry/fan and heating operations cannot be done at the
same time. When COOL/DRY/FAN is selected with one unit and HEAT with another or vice
versa, the unit selected last goes into standby mode.
Advanced Features
Timer
The TIMER feature establishes the amount of time that will elapse before the unit will
automatically turn on/off.
Press the TIMER ON button to initiate the auto-on time sequence. Each subsequent press of
this button will increase the setting in 30 minute increments up to 10 hours. Once the setting time
displays 10.0, each additional press will increase the setting in 60 minute increments. To cancel the
auto-timed program, simply adjust the timer to 0.0.
Press the TIMER OFF button to initiate the auto-off time sequence. Each subsequent press of
this button will increase the setting in 30 minute increments up to 10 hours. When the setting time
displays 10.0, each additional press will increase the setting in 60 minute increments. To cancel the
auto-timed program, simply adjust the timer to 0.0.
TIMER ON and OFF setting example.
Keep in mind that the time periods you set for both the on and off feature refers to hours after the
current time.
If the current time is 1:00 PM and the TIMER ON setting is adjusted to 2.5 hours, the auto-on time
sequence will turn the air conditioner on 2.5 hours later at 3:30 PM. Setting the TIMER OFF auto-
off sequence to 5.0 hours will turn off the air conditioner 5 hours later at 6:00 PM.
Timer starts
Current Time
2:00PM
3:00PM
1:00PM
2.5 hours later
5 hours later
Unit turns
Unit turns
OFF
ON
3:30PM
4:00PM
5:00PM
6:00PM
DURASTAR.COM
14
Eco
The ECO feature is designed to decrease energy use while you sleep. This feature can only be
activated by the wired thermostat. The ECO feature is not available in FAN or DRY mode.
Press the ECO button when you are ready to go to sleep. When in COOL mode, the unit will
increase the temperature by 2°F (1°C) after 1 hour, and will increase an additional 2°F (1°C) after
another hour. When in HEAT mode, the unit will decrease the temperature by 2°F (1°C) after 1
hour, and will decrease an additional 2°F (1°C) after another hour.
The ECO feature will turn off after 8 hours and the system will return to normal functioning.
ECO Operation
In COOL mode, temperature adjusts
(+1°C/2°F) per hour for the first two hours
Set
Temperature
1hr
In HEAT mode, temperature adjusts
(-1°C/2°F) per hour for the first two hours
Saves energy during sleep
Follow Me
This feature uses the temperature at the thermostat's location, instead of the indoor unit's
location, to optimize the temperature around you and ensure maximum comfort. Press the
FOLLOW ME button to turn on this feature and the thermostat will display the temperature at its
location. When using AUTO, COOL, and HEAT modes the air conditioner will continue running until
the temperature at the thermostat's location is satisfied. Press the FOLLOW ME button again to
turn off this feature.
Auto-Restart
The auto-restart feature is enabled when power is interrupted to the unit. After power is restored,
the unit will automatically return to its prior settings before power was lost. No buttons need to be
pressed to set this feature - it is automatic.
Keep
Running
1hr
DURASTAR.COM
15