DAPAudio Cesium 200 Manual - Página 6

Navegue en línea o descargue pdf Manual para Amplificador DAPAudio Cesium 200. DAPAudio Cesium 200 11 páginas.

Description of the device

Features

The Cesium 200 and 300 are professional amplifiers :

Cesium 200 and 300

• 2x Channel in

• 2x Speakon out

• Built-in Clip Limiter

• Switch-able entrance sensitivity: 0.77V, 1V and 1.4V

• Parallel or stereo mode

• 30 Hz Hi-pass filter, -3 dB, 18 dB/oct.

• Ground-selector

• Back to front airflow

• Amplifier has softstart and separate standby power. In case of temporary power failure, the amplifier has to

be restarted by pushing the ON/OFF switch again. On and off switching eventually happens with relay.

Overview

1. Handles

Handles are used for easy transportation.

2. Air vents

Don't obstruct or insert objects into air vents.

3. Power Button

Use this button to switch your power amplifier on.

4. "CLIP" Indicator

Any illumination of the red clip indicates a state of over modulation (distortion at extremely high volumes).

In this case, check the output signal of your mixer and turn down the input gain control. Please keep in

mind that the power amplifier cannot correct any distortion.

5. Channel 1 Volume Control

In stereo mode, this potentiometer allows the adjustment of the channel 1 input level. (left channel ). In

Bridge mode, this potentiometer allows the adjustment of the two channels at the same time.

6. Channel 2 Volume Control