DAPAudio Compact 6.2 D2320 Manual - Página 8

Navegue en línea o descargue pdf Manual para Mezclador de música DAPAudio Compact 6.2 D2320. DAPAudio Compact 6.2 D2320 16 páginas.

Imprimir página
DAPAudio Compact 6.2 D2320 Manual
Compact 6.2

Backside

Fig. 02
Power adapter connector
The remote AC power supply. Use only the supplied DAP Audio adapter.
Master Equalizer
The output equalizer allows to shape the outcoming audio signal. The high and low shelving controls
have their frequencies fixed at 12kHz and 80Hz, respectively. The mid-range control has a peaking
response frequency at 2,5kHz. All 3 bands have up to 6dB of cut and boost, with a center detent for
off. Turning the equalizer control to the right amplifies the frequency range, turning to the left
attenuates the signal. Minor changes to the equalizer control usually produce the best results. Try to
avoid excessive enhancement of the mid band.
Master B XLR balanced out connector
Connect an amplifier with balanced inputs.
Master B RCA unbalanced out connector
RCA output. Connect an amplifier/active speaker with unbalanced inputs.
Master A RCA unbalanced out connector
RCA output. Connect an amplifier/active speaker with unbalanced inputs.
Monitor RCA unbalanced out connector
RCA output. Connect an amplifier/active speaker with unbalanced inputs.
Channel gain control (AUX front input)
Channel input levels (20,21) are determined by their corresponding gain controls. With the gain
control you can adjust the line input sensitivity, while optimally matching the incoming signals to the
mixer's internal operation level. The high gain of this mixer is ideal when dealing with very low input
levels.
Channel gain control (input 2)
Channel input levels (33) are determined by their corresponding gain controls. With the gain control
you can adjust the line input sensitivity, while optimally matching the incoming signals to the mixer's
internal operation level. The high gain of this mixer is ideal when dealing with very low input levels.
Channel gain control (input 1)
Channel input levels (34) are determined by their corresponding gain controls. With the gain control
you can adjust the line input sensitivity, while optimally matching the incoming signals to the mixer's
internal operation level. The high gain of this mixer is ideal when dealing with very low input levels.
Line input 2 connector
RCA input. Connect a line level device.
Line input 1 connector
RCA input. Connect a line level device.
Mic gain control (Mic 1-2 inputs)
The microphone input level is determined by the gain control. Turn the gain control to adjust the
microphone input sensitivity for an optimal match with the mixer's internal operation level.
Mic 1-2 combo input connector
Electronically balanced combo-type input for connecting low impedance microphones. The input
has extremely low noise and hum. When connecting a microphone, make sure that the pin
assignment is correct. Always make sure to read the manual of the microphone you want to
connect. Use only one connector at a time: (01) or (36).
DIP Switch (Phantom power on/off / Hi-Pass 80Hz on/off)
Switch # 1 (Phantom power ON/OFF), switch # 2 (Hi-Pass filter ON/OFF).
Ordercode: D2320
7