Belimo VRU-M1R-BAC Ficha técnica - Página 14

Navegue en línea o descargue pdf Ficha técnica para Unidad de control Belimo VRU-M1R-BAC. Belimo VRU-M1R-BAC 17 páginas.

Installation notes

Service

NFC connection

www.belimo.com

Technical data sheet

Servicing

Cleaning work during installation, commissioning or maintenance

Belimo VAV devices are maintenance-free. We recommend dry removal of dust from the outside

of the housing if necessary.

The duct system and the VAV units are maintained on the occasion of the cleaning intervals

required by law or by the specific system. Please observe the following points.

Cleaning work on the damper, differential pressure pickup devices and pressure tubes

When cleaning the duct system or the VAV unit, remove the pressure tubes on the VAV

controller so that it will not be affected.

Using compressed air, e.g. blowing out the differential pressure pickup devices or pressure

tubes

Before doing this work, disconnect the differential pressure pickup devices or pressure tubes

from the differential pressure sensor.

Connecting the pressure tubes

To ensure the correct installation of the pressure tubes, we recommend marking them with + or

– before disassembly.

Belimo devices marked with the NFC logo can be operated with the Belimo Assistant App.

Requirement:

- NFC- or Bluetooth-capable smartphone

- Belimo Assistant App (Google Play & Apple AppStore)

Align NFC-capable smartphone on the device so that both NFC antennas are superposed.

Connect Bluetooth-enabled smartphone via the Bluetooth-to-NFC Converter ZIP-BT-NFC to the

device. Technical data and operation instructions are shown in the ZIP-BT-NFC data sheet.

VRU-M1R-BAC • en-gb • 2023-10-05 • Subject to change

VRU-M1R-BAC

14 / 17