Duratech LINK Touch DLT10-RGB Manual - Página 11
Navegue en línea o descargue pdf Manual para Mando a distancia Duratech LINK Touch DLT10-RGB. Duratech LINK Touch DLT10-RGB 14 páginas.
Imprimir página
Caring for the LinkTouch
The LinkTouch
requires very little maintenance
TM
- You may occasionally need to clean the exterior of the housing.
To clean the exterior of the LinkTouch
a soft, damp cloth.
NOTE: Do not use cleaning tissues or chemical substances
which might damage the surface
- Don't place the LinkTouch
in direct sunlight
TM
Troubleshooting
This section includes information about what to do if you encounter
a problem with your LinkTouch
TM
. If you need further assistance,
please contact your installer or distributor or go to the support
section of the House of Duratech website at
www.duratech.be/duracare
Battery error
remove from heat source or take out of sunlight
Heat pump error
consult manual of heat pump for trouble shooting
Pool light error
consult manual of pool light for trouble shooting
Aux error
consult manual of auxiliary connected device for trouble
shooting
Cover error
consult manual of cover for trouble shooting
20
TM
TM
, wipe the exterior with
Link Controller compatibility
To control the lights and the cover system, the LinkTouch™ communicates
with the Link Controllers.
If your Link Controller has the sticker " LinkTouch™ ready", then you do not
need to take any action. In this case the LinkTouch™ can work with the Link
Controller.
In case the Link Controller does not have a "LinkTouch™ ready" sticker, then
your Link Controller-requires a fi rmware update.
See below picture of the control boards of the Link Controller, which
are upgradable with an SD card, that is included in the packaging of the
LinkTouch™.
NOT upgradable
control board
After the fi rmware upgrade of the Link Controller, the handheld remote
control is no longer compatible with the Link Controller. In case a compatible
handheld remote control is required, then this one can be ordered separately.
upgradable
control board
21