DAPAudio COM-54 Manual del usuario - Página 8
Navegue en línea o descargue pdf Manual del usuario para Sistema de micrófono DAPAudio COM-54. DAPAudio COM-54 20 páginas. 4 channel wireless microphone set
Imprimir páginaBackview
7) Antenna B
8) Channel 4 balanced out
9) Channel 3 balanced out
10) Channel 3 balanced out
11) Channel 1 balanced out
12) Mix balanced out:
Balanced XLR connector mixes all four channels into a single output
13) Mix unbalanced out:
Unbalanced 1/4" jack plug connector mixes all four channels into a single output
14) Antenna A
15) Power Input Connector 12V 600mA
16) Fan
Installation
Remove all packing materials from the Com-54. Check that all foam and plastic padding is removed. Put
the 2 antennas into socket A and B at the backside in a vertical angle. Remove the rubber protection
caps at the underside of the microphones that covers the recharge inputs (See Fig 4).
When connecting the power supplies, assure yourself that the right supplies are connected to the right
devices. Look at the red/green sticker at the bottom of the microphone.
Always disconnect from electric mains power supply before cleaning or servicing.
Damages caused by non-observance are not subject to warranty.
6
Fig. 4
Fig. 3