Duratool D03124 Manual - Página 3

Navegue en línea o descargue pdf Manual para Multímetro Duratool D03124. Duratool D03124 10 páginas. Digital multimeter autoranging
También para Duratool D03124: Manual de inicio rápido (9 páginas)

Imprimir página
Duratool D03124 Manual

IMPORTANT SAFETY INFORMATION

Please read these instructions carefully before use and retain for future
reference.
•
When using electrical appliances basic safety precautions should always be
followed.
•
Use the meter only as specified in this manual, or the protection provided may be
impaired.
•
Do not operate the meter or use test leads if they appear damaged, or if the meter
is not operating properly.
•
There are no user-serviceable parts in this product. Refer servicing to qualified
personnel.
•
Do not apply voltage between the COM and OHM terminals, while in the
resistance measuring state.
•
Do not measure current with the test leads inserted into the voltage or OHM
terminals.
•
Do not expose the instrument to direct sunlight, extreme temperature or humidity.
•
Before measuring current, check the fuses and turn the power to the circuit off
before connecting the meter to the circuit.
•
Disconnect circuit power and discharge all high voltage capacitors before testing
continuity. diode, resistance, capacitance or current.
•
Do not use the meter around explosive gas or vapour.
•
When using the test leads, keep your fingers behind the finger guards.
•
Remove test leads from the meter before opening the meter case or battery door.
•
Never operate the meter with the cover removed or the battery door open.
•
Use only the test leads supplied or the protection may be impaired.
•
Replace the batteries as soon as the low battery indicator appears on the display.
•
Fit a full set of batteries at one time.
•
Remove dead batteries from the appliance or if it is not going to be used for a long
time.
•
Never mix old and new batteries together, or different types of batteries.
•
Never dispose of batteries in a fire, or attempt to recharge ordinary batteries.

SYMBOL GUIDE

~
~
Dangerous
Voltage
AC
(Alternating
Current)
DC (Direct
Current)
AC or DC
3
Ground
Warning
(adhere to
instruction manual)
Double Insulation
Fuse