Duratool D03145 Manual de inicio rápido - Página 3
Navegue en línea o descargue pdf Manual de inicio rápido para Multímetro Duratool D03145. Duratool D03145 7 páginas. Multimeter with automotive ranges
Imprimir páginaWHAT'S INCLUDED?
•
One multimeter
•
One pair of test leads
IMPORTANT SAFETY INFORMATION
Please read these instructions carefully before use and retain for future
reference.
•
When using electrical appliances basic safety precautions should always be
followed.
•
Do not operate the meter if the test leads are damaged in any way. Damaged
leads should be replaced.
•
Do not exceed the input
limits shown in the table
(right).
•
To avoid damage to the
meter do not apply more
than 500V between
any terminal and earth
ground.
•
Disconnect the test leads
from the circuit under
test before changing test
ranges.
•
Use caution when working above 60V DC or 25V AC rms, as such voltages pose a
shock hazard.
•
This meter is designed for indoor use only.
•
Replace the battery as soon as the low battery indicator appears.
•
Turn the meter off when it is not in use and remove the battery when not in use for
a long period of time.
•
Do not store the meter in a place of direct sunlight, high temperature or high
humidity.
GENERAL SPECIFICATION
Display
Measurement Rate
Overrange Indication
Polarity Indication
Low Battery Indication
Overload Protection
Operating Temperature
Storage Temperature
Battery Type
Dimensions
Weight
•
One multifunction adaptor
•
One user manual
Function Range Input Terminals Maximum Input
DCV 2~600V
ACV 2~600V
OHM
Diode
DCA 200mA
ACA 200mA
DCA 10A
ACA 10A
3½ digit LCD
2-3/sec
"1" will be displayed
Automatic negative
"
" displayed
+ -
Full range
0°C to 40°C, 0 to 75% RH
-10°C to 50°C, 0 to 75% RH
One 9V battery IEC 6F22, NEDA 1604
176 x 88 x 38mm (L x W x H)
310g (including battery)
3
VΩ COM
VΩ COM
mA COM
200mA DC/AC
10A COM
600V DC
250V DC/AC
10A DC/AC