DuraTrel Oxford Instrucciones de montaje - Página 4

Navegue en línea o descargue pdf Instrucciones de montaje para Césped y jardinería DuraTrel Oxford. DuraTrel Oxford 4 páginas. Trellis

Insert left and right trellis panels (from Page 3) into 65" corner post (part 1). In order for trellis to look

symmetrical, top/bottom cross rails, horizontal slats and bent tops must be fully inserted into 59½" left and

right posts. Using two ¾" screws per outer post and four ¾" screws for corner post, fasten together trellis. Using

PVC, super or crazy glue, apply glue to inner corners of each 2" sq. post cap and place on top of each post.

INSTALLATION

In desired location set trellis in place and mark where ground anchors will need to be inserted. Using a block of

wood to protect ground anchors; pound each anchor into place. (If ground is extremely hard, loosen or soak soil

before inserting ground anchors). Set trellis into ground anchors.

If combining with Model# 11187 Corner Slat Planter to make a planter trellis, use a straight blade screwdriver to

pop off three 2" sq. post caps and slide trellis over the planter legs.

Oxford Trellis