DAQ system USB3-SDI01 Manual del usuario - Página 6

Navegue en línea o descargue pdf Manual del usuario para Hardware informático DAQ system USB3-SDI01. DAQ system USB3-SDI01 10 páginas.

Imprimir página
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50

2.2 J2 Connector

BNC(Bayonet Neil-Concelman) connecter is a miniature quick connect/disconnect RF
connecter used for coaxial cable. It features three part of cable, at the center of the signal
lines and coax internal signal that surround outer conductor (shield), and insulation. BNC
connecters are made to match the characteristic impedance of cable at either 50 ohms or
75 ohms.
The 75 ohm types can sometimes be recognized by the reduced or absent
dielectric in the mating ends.
Caution) Report : (RG-59 75Ohm Cable for BNC Connecter, Canare BCP-C4F)
Digital Input/Output 30
DIO_30
Digital Input/Output 31
DIO_31
DIO_32
Digital Input/Output 32
DIO_33
Digital Input/Output 33
DIO_34
Digital Input/Output 34
DIO_35
Digital Input/Output 35
DIO_36
Digital Input/Output 36
Digital Input/Output 37
DIO_37
DIO_38
Digital Input/Output 38
DIO_39
Digital Input/Output 39
REV1
Reserver 1
U_SDA
Serial Data
REV0
Reserved 0
U_SCL
Serail Clock
GND
Ground
GND
Ground
[Figure 2-3. BNC Connecter and Cable]
6-
-
ADP-SDI01 User's Manual(Rev(1.1)
DVAL
PCLK
To CA
From CA (Input Only)
SDA
SCL
http://www.daqsystem.com