Duratuf GG97 Manual de instrucciones de montaje - Página 8

Navegue en línea o descargue pdf Manual de instrucciones de montaje para Almacenamiento exterior Duratuf GG97. Duratuf GG97 16 páginas.

Imprimir página

ASSEMBLE DOOR

SELECT:

3 x 1.850 m Door Sheets (Narrow)

2 x 0.945 m Door Top/Bottom Flashings

2 x 0.495m Door Top/Bottom Flashings

4 x 1.850m Door Side Flashings

2 x 1.160m Door Brace Flashings

2 x 0.915m Door Brace Flashings

6 x Hinges

1 x Padbolt Support Flashing

108 x Rivets

STEP 1:

•

Lay out 2 x door sheets on a flat surface

making sure narrow pans are on the out-

side.

•

Rivet sheets together ensuring ends are

flush with each other.

STEP 2:

•

Position door side flashings and door top and

bottom flashings and assemble door as

shown, ensuring narrow face of flashing is on

the front as per fig.1

•

Drill and rivet as per diagram.

STEP 3:

• Attach hinges to door side flashing using rivets

provided. Ensure hinge is flush with back of

door, and 60mm in from each end as per fig.2.

• Using six rivets, attach padbolt support as

shown in fig.3.

STEP 4:

• On the back of the door, place door braces

in position as shown in fig.4.

• Ensure that the top and bottom ends of the

braces are under the door flashings as

shown in fig.5 and opposite ends of the

braces overlap in the middle as shown in

fig.6.

• Rivet door brace flashings onto back of

door as shown. Where possible, rivet from

SMALL DOOR:

• Assemble small door in same way as large door using 0.495 m top and bottom flashings.

• Before screwing on 0.915m door braces, attach weather strip flashing to back of door side flashing using six riv-

ets ensuring it protrudes 20mm out from door side.

fig.1

fig.2

Hinges

fig.

fig.3

NARROW PANS

fig.4

fig.6