Duratuf SENTRY SS2007 Manual de instrucciones de montaje - Página 3

Navegue en línea o descargue pdf Manual de instrucciones de montaje para Almacenamiento exterior Duratuf SENTRY SS2007. Duratuf SENTRY SS2007 16 páginas.

Imprimir página
CONGRATULATIONS ON PURCHASING A DURATUF SENTRY SHED.
BEFORE YOU BEGIN THE ASSEMBLY PLEASE NOTE SOME IMPORTANT POINTS:
•
Read all instructions carefully
•
Identify all parts and check quantities against parts list
•
Select a level site
•
Do not mark cladding with pencil as lead can cause corrosion to cladding
•
Do not attempt to build your shed in high winds
•
Beware of sharp edges, recommend use of gloves
•
Protect your eyes and ears
•
For ease of assembly, use a friend to help
DRILL
HAMMER
•
Wash all surfaces annually using a hose and soft nylon brush.
•
Within 2 km of coast – wash every 3 months as above. After a storm, wash the cladding and the gutters as soon
as possible to remove any highly corrosive salt deposits.
•
Volcanic Ash Fallout – wash as soon as possible, removing fall out from roof and gutters.
•
Do not allow manures, chemicals or other corrosive materials to have direct contact with cladding

BEFORE YOU START:

TOOLS REQUIRED:

RIVETER
NAIL PUNCH

WARRANTY REQUIREMENTS:

Following are the minimum requirements for cladding used in Sentry Sheds.
SAFETY:
SQUARE DRILL BIT
3.5mm DRILL BIT
TAPE MEASURE
8mm HEX DRIVE
3
LADDER
SKILL SAW
(timber floor only)
.