Duratuf KIWI SHEDS KS1 Manual de instrucciones de montaje - Página 10

Navegue en línea o descargue pdf Manual de instrucciones de montaje para Almacenamiento Duratuf KIWI SHEDS KS1. Duratuf KIWI SHEDS KS1 18 páginas.

KS1 DOOR JAMB & CORNER FLASHINGS

Step1:

Fit Door Jamb Flashing (104) in between Top

and Bottom Plates and hard against Stud.

Attach Door Jamb Flashing with three rivets

into Rib on the outside and three 30mm

clouts into studs on the inside. Repeat with

the other Door Jamb.

Step3: Measure and cut Doorstep Flashing (106) to fit in

between Door Jambs. Position the Doorstep Flash-

ing in between the Door Jambs at bottom of door-

way, nail through top of flashing using three 30mm

Clouts. Repeat with the Overdoor Flashing (105).

CLADDING

CORNER

FLASHING

Step 2: On the left hand side of the front wall fit Corner

Flashing (101) over Door Jamb Flashing and

rib . With top of the Corner Flashing flush with

the top of the Top Plate, rivet in place using six

rivets.

Step 4: Fit the two short front Corner Flashings over corner

Ribs and rivet in place using six rivets per flashing.

Fit the two longer back Corner Flashings over cor-

ner Ribs and rivet in place using six rivets ensuring

the flashing is flush with the top plate. When fitting

right hand Corner Flashing on the front wall, ensure

it is parallel with the Door Jamb.

END

PLATE

STUD

FRONT PLATE

DOOR JAMB