DURAVAC CVWM510 Manual del usuario - Página 6

Navegue en línea o descargue pdf Manual del usuario para Aspiradora DURAVAC CVWM510. DURAVAC CVWM510 14 páginas. Wet/dry vacuums

Imprimir página

GENERAL ASSEMBLY INSTRUCTIONS

WARNING:
DO NOT PLUG POWER CORD INTO POWER OUTLET, MAKE SURE PLUG IS
DISCONNECTED BEFORE ASSEMBLING THE WET/DRY VAC.
UNPACKING YOUR WET/DRY VACUUM & GENERAL ASSEMBLY
1. Verify that the power cord is disconnected from the outlet. (fig. 1)
2. Undo the latches. (fig. 2)
3. Lift the power head off of the container. (fig. 3)
4. Remove the contents from inside the container. Make sure you have all contents as listed on page 5.
(fig. 4)
5. Replace the power head to the container and insert the noise diffuser into the blowing port. (fig. 5)
MOUNTING RACK AND STORAGE ASSEMBLY
IMPORTANT!
•
Do not mount the rack over 5 feet from the floor.
•
Do not screw the rack to drywall only. Secure the screws to a stud.
6