4-noks Power Reducer Manual técnico - Página 13

Navegue en línea o descargue pdf Manual técnico para Domótica 4-noks Power Reducer. 4-noks Power Reducer 20 páginas.

Elios4you Installation - (Power Reducer E4U ONLY)

6.1) Mount Elios4you on DIN rail within the consumer unit

- if it is not possible to fit Elios4you inside the general switchboard, you will need to use an additional panel enclo-

sure -

6.2) Carry out the connections

a) Identify the Live-phase that comes from

the GENERATION meter

Generation

Mains

Household

6.3) Repeat the procedure for the Live-phase from the Mains electrical meter

WARNING: place the CT making sure that the green point is directed towards the Residual-Current Circuit Breaker

WARNING: make sure that all the household electrical appliances are connected to the electrical system in between

WARNING: any change to the CT cable length would lead to an increased error rate in data collection. 4-noks does

6.4) Power Elios4you measuring device as shown on the wiring scheme, paying attention to the

phases sequence

6.5) Check the LEDs on the front panel of Elios4you and make sure they report the correct feed-back

from the device

4-noks srl

Via per Sacile, 158

31018 Francenigo di Gaiarine (TV) ITALY

Tel +39 0434 768462

Fax +39 0438 694617

www.4-noks.com

WARNING:

b) Grab the GENERATION CT

the 2 CTs and the related meters. Otherwise, the resulting measurements will not be reliable.

not recommed such alteration of the device.

the device must be installed inside an electrical panel. Use the appro-

priate caution to let the the Radio Transmitter inaccessible to the end

user, ensuring at the same time the possibility of operation by skilled

personnel during technical assistance.

Before mounting Elios4you, remove the sticker / label stating USER

and PASSWORD. Store it in a safe place to access the dashboard.

Generation - WHITE

Exchange - YELLOW

E4U

c) Securely clamp the CT over the Live-

phase cable

from RCCB

to the meter

Pag