Contemporary Research QIP-SDI 2 Manual del producto - Página 7

Navegue en línea o descargue pdf Manual del producto para Media Converter Contemporary Research QIP-SDI 2. Contemporary Research QIP-SDI 2 14 páginas. Qip iptv encoders

Imprimir página

Program A and Program B

There are two separate menus for Program A and B (examples below for the QIP-HDMI 2)

Encoder Settings

Sets video and audio properties for the program

Video Input

Select the video input (Program B adds the option to select NONE)

HDMI 1| HDMI 2 | Video 1| Video 2

Input Res

Displays resolution of current source

Output Res

Set the Program output resolution, auto resolution will override this setting

1080i | 720p | 480p | 480i | 576i

Auto Out Res

When set to On, the QIP will automatically output the program as the same resolution as the

source, including 1080p. Default is On. On | Off

Vid Bitrate

Bitrate is adjustable in half steps from 9-20 Mbps for MPEG2, 5-10 for H.264 HD, less for SD.

Default rate will be 18 or 9 Mbps, set to 18 or below for dual-channel operation.

Video Format

Select MPEG2 or H.264

Aspect Ratio

Menu visible when there is a 480i source. Sets the video to display the 480i video as 4:3 or 16:9.

4:3 | 16:9

Aud 1 Input

Sets audio for the currently selected source. If you plan on switching sources in your

application, select each video input, then select the associated audio. The audio will then

automatically follow the selected video input.

Aud 1 Format

Selects audio format for stereo PCM or analog audio. AAC | MP12

Aud 1 Lang

Displays metatext for audio channel language.

English | Spanish | Portuguese |French |German

Aud 2 Input

Sets the source for the second SAP audio track for the selected video input. Audio will be in

MPEG 1 Layer 2 format

Aud 2 Lang

Displays metatext for SAP audio channel language.

English | Spanish | Portuguese |French |German

Chan Name

Enters channel (Program) short name, up to 7 characters. QIP A or QIP B is default text.

Press right or left arrow to start editing, use Up and Down arrows to select character.

No Vid Color

Sets background color displayed when no video is present

Orange | Purple (default) | Green

Sync TrigLev

May help how fine details are displayed for component input 1-4. Only on Web page.

Clock Phase

RGB/Component input, can improve sharpness for some videos or signage 1-6

CC Source

Selects source for captioning, Line 21 from NTSC, 708/608 from SDI (ex: QIP-SDI2)

None | Video 1 | Video 2 | SDI 1 | SDI 2

Horiz Freq

Shows horizontal frequency of source

Vert Freq

Shows vertical frequency of source

Horiz Adjust

At the Horizontal menu, press the SELECT button to start the process – you will see a white bar

in the middle of the QIP display.

- Up zooms the video horizontally, while Down scales the video down

- Left moves the video left, Right moves the image right

- The solution is automatically saved for that resolution. Repeat for other resolutions, if needed

Vert Adjust

Same as above, Up/Down positions video, L/R zoom and shrink

IP Settings

Defines streaming properties

Eth Protocol

Selects UDP or RTP Ethernet protocol

UDP Mode

Selects UDP mode, sub menus change depending on mode

Unicast | Multicast

Dest Uni Addr

Enter destination IP address for unicast

DstMultiAddr

Enter IP address for multicast

Dest IP Port

Enter UDP port for unicast or multicast

Contemporary Research

QIP IPTV Encoders