DURAVIT XL 6516 Manual de instrucciones de instalación - Página 8
Navegue en línea o descargue pdf Manual de instrucciones de instalación para Mobiliario interior DURAVIT XL 6516. DURAVIT XL 6516 11 páginas. X-large series
Imprimir página
16
Using 5/8" drill bit, drill the anchor
holes, that have been marked.
20
Install the vanity drawers.
MAL_X-Large_XL6516/15.04.1
17
The plastic anchors provided are
for concrete wall applications.
21
Locate the plate with Duravit logo.
18
For wood stud walls, bolts should
be screwed into wood backing.
22
Remove plate with Duravit logo.
19
When mounting the washbasin into
the wood stud wall, there must be
adjustment bracing.
We recommend doubling 2x6's or
2x8's between the studs to form a
solid anchoring point.
Screw mounting bolts into the pre
drilled holes with an adjustable
wrench.
Screw in the full length of the
mounting bolts, so that the leg
thread is no longer visible.
Carefully slide washbasin onto the
mounting bolts. Insert the white
plastic sleeve over bolt and into the
hole in the washbasin.
Insert the provided washer and
nut.
Hand tighten the nut, so the
washbasin is secure.
Install the siphon.
23
Level the vanity drawer by
adjusting the two screws.