AplicAir AM4O-81HPDC1 Manual del usuario - Página 7
Navegue en línea o descargue pdf Manual del usuario para Aire acondicionado AplicAir AM4O-81HPDC1. AplicAir AM4O-81HPDC1 11 páginas.
Imprimir páginaELECTRICAL CONNECTIONS
AM2O-51HPDC1:
1. R emove the handle at the right side plate of the
outdoor unit (one screw).
.
2
Remove the cable clamp, connect the power connection
cable with the terminal at the row of connection and fix
the connection. The fitting line distributing must be
consistent with the indoor unit. terminal of line bank.
Wiring should meet that of indoor unit.
Fix power connection wire by wire clamp.
3.
4.
Ensure wire has been fixed well.
Install the handle.
5.
An all-pole disconnection switch having a contact
separation of at least 3mm in all pole should be
connected in fixed wiring.
Wrong wire connection may cause malfunction of some
electric components.After fixing cable, ensure that
leads between connection to fixed point have some space.
The connection pipes and the connectiong wirings of
the unit A and unit B must be corresponding to each
other respective.
The appliance shall be installed in accordance with
national wiring regulations.
Note: the above figures are only intended to be a simple
diagram of the a ppliance and m
appearance of the units that have been purchased.
a y not correspond to the
AM2O-51HPDC1
Front
side plate
To unit A
L
Power
connecting
cord
L
N
L
INS TALLER
Handle
To unit B
Power
connecting
cord
To the power supply
5