Aplisens WW-11ALW Manual del usuario - Página 2

Navegue en línea o descargue pdf Manual del usuario para Monitor Aplisens WW-11ALW. Aplisens WW-11ALW 20 páginas.

Symbols used

Symbol

Warning to proceed strictly in accordance with the information contained in the doc-

umentation in order to ensure the safety and full functionality of the device.

Information particularly useful during installation and operation of the device.

Information particularly useful during installation and operation of an Ex type device.

Information on disposal of used equipment.

The manufacturer will not be liable for damage resulting from incorrect installation,

failure to maintain a suitable technical condition of the device or use of the device

other than for its intended purpose.

Installation should be carried out by qualified staff having the required authoriza-

tion to install electrical and I&C equipment. The installer is responsible for perform-

ing the installation in accordance with manual as well as with the electromagnetic

compatibility and safety regulations and standards applicable to the type of instal-

lation.

In systems with I&C equipment, in case of leakage, there is a danger to staff due

to the medium under pressure. All safety and protection requirements must be

observed during installation, operation and inspections.

If a malfunction occurs, the device should be disconnected and handed over to the

manufacturer or an authorized representative for repair.

In order to minimize the risk of malfunction and associated risks to staff, the device

is not to be installed or used in particularly unfavourable conditions, where the fol-

lowing hazards occur:

Changes made to the manufacturing of products may be introduced before the paper version of the

manual is updated. The up-to-date manuals are available on the manufacturer's website:

www.aplisens.com.

BASIC REQUIREMENTS AND SAFE USE

−

possible mechanical impacts, excessive shocks and vibration;

−

excessive temperature fluctuation;

−

water vapour condensation, dusting, icing

Description